23-04-2021

USB PassThru Driver ( Multi-instance ) Driver



C: Program Files I+ME Actia GmbH USB Driver PassThru+XS2G unins000.exe is the full command line if you want to remove I+ME USB Driver PassThru+XS2G 1.0.1.291. Unins000.exe is the programs's main file and it takes around 705.73 KB (722664 bytes) on disk. The executables below are part of I+ME USB Driver PassThru+XS2G 1.0.1.291. PassThru+ XS USB Driver is a VCI (vehicle communication Interface) enabling you to communicate with the ECU's according to the J2534 specification. Full Specifications What's new in version 1.0.0.0. Mar 04, 2020 Access a USB device in a VirtualBox Guest. VirtualBox 5.0 provides support for USB 3.0 devices if you install its Extension Pack.After the extension pack is in place, start your Virtual Machine whether running as a guest on a Linux or Windows computer.

You can use locally attached USB devices, such as thumb flash drives, cameras, and printers, from a remote desktop. This feature is called USB redirection.

When you use this feature, most USB devices that are attached to the local client system become available from a menu in Horizon Client. You use the menu to connect and disconnect the devices.

Usb Passthru Driver ( Multi-instance ) Driver Installer

Note: With View Agent 6.1 or later, or Horizon Agent 7.0 or later, you can also redirect locally connected USB thumb flash drives and hard disks for use in published desktops and remote applications. Other types of USB devices, including other types of storage devices, such as security storage drives and USB CD-ROM, are not supported in published desktops and applications. With Horizon Agent 7.0.2 or later, published desktops and applications can support more generic USB devices, including TOPAZ Signature Pad, Olympus Dictation Foot pedal, and Wacom signature pad. Other types of USB devices, including security storage drivers and USB CD-ROM drives, are not supported in published desktops and applications.

Using USB devices with remote desktops has the following limitations:

  • When you access a USB device from a menu in Horizon Client and use the device in a remote desktop, you cannot access the device on the local computer.
  • USB devices that do not appear in the menu, but are available in a remote desktop, include human interface devices such as keyboards and pointing devices. The remote desktop and the local computer use these devices at the same time. Interaction with these devices can sometimes be slow because of network latency.
  • Large USB disk drives can take several minutes to appear in the desktop.
  • Some USB devices require specific drivers. If a required driver is not already installed on a remote desktop, you might be prompted to install it when you connect the USB device to the remote desktop.
  • If you plan to attach USB devices that use MTP drivers, such as Android-based Samsung smart phones and tablets, configure Horizon Client so that it automatically connects USB devices to your remote desktop. Otherwise, if you try to manually redirect the USB device by using a menu item, the device is not redirected unless you unplug the device and then plug it in again.
  • Do not connect to scanners by using the Connect USB Device menu. To use a scanner device, use the scanner redirection feature. This feature is available for Horizon Client when used with View Agent 6.0.2 or later or Horizon Agent 7.0 or later. See Using Scanners.
  • Webcams are not supported for USB redirection using the Connect USB Device menu. To use a webcam or audio input device, you must use the Real-Time Audio-Video feature. See Using the Real-Time Audio-Video Feature for Webcams and Microphones.
  • The redirection of USB audio devices depends on the state of the network and is not reliable. Some devices require a high data throughput even when they are idle. Audio input and output devices work well with the Real-Time Audio-Video feature. You do not need to use USB redirection for those devices.
  • You cannot format a redirected USB drive in a published desktop on an RDS host unless you connect to the remote desktop as an administrator user.

You can connect USB devices to a remote desktop either manually or automatically.

Note: Do not redirect USB devices such as USB Ethernet devices and touch screen devices to the remote desktop. If you redirect a USB Ethernet device, your client system loses network connectivity. If you redirect a touch screen device, the remote desktop receives touch input but not keyboard input. If you have set your virtual desktop to autoconnect USB devices, you can configure a policy to exclude specific devices.
  • To use USB devices with a remote desktop, a Horizon administrator must enable the USB feature for the remote desktop.
  • When Horizon Client was installed, the USB Redirection component must have been installed. If you did not include this component in the installation, uninstall the client and run the installer again to include the USB Redirection component.
Driver

Procedure

  • Manually connect the USB device to a remote desktop.
    1. Connect the USB device to your local client system.
    2. From the VMware Horizon Client menu bar, click Connect USB Device.
    3. Select the USB device.
    The device is manually redirected from the local system to the remote desktop.
  • Connect the USB device to a remote hosted application.
    1. In the desktop and application selector window, open the remote application.
      The name of the application is the name that your administrator has configured for the application.
    2. In the desktop and application selector window, right-click the application icon and select Settings.
    3. In the left pane, select USB Devices.
    4. In the right pane, select the USB device and click Connect.
    5. Select the application, and click OK.
      Note: The name of the application in the list comes from the application itself and might not match the application name that your administrator configured to appear in the desktop and application selector window.
      You can now use the USB device with the remote application. After you close the application, the USB device is not released right away.
    6. When you are finished using the application, to release the USB device so that you can access it from your local system, in the desktop and application selector window, open the Settings window again, select USB Devices, and select Disconnect.
  • Configure Horizon Client to connect USB devices automatically to the remote desktop when you plug them in to the local system.
    Use the autoconnect feature if you plan to connect devices that use MTP drivers, such as Android-based Samsung smart phones and tablets.
    1. Before you plug in the USB device, start Horizon Client and connect to a remote desktop.
    2. From the VMware Horizon Client menu bar, select Connect USB Device > Autoconnect USB Devices when Inserted.
    3. Plug in the USB device.
    USB devices that you connect to your local system after you start Horizon Client are redirected to the remote desktop.
  • Configure Horizon Client to connect USB devices automatically to the remote desktop when Horizon Client starts.
    1. From the VMware Horizon Client menu bar, select Connect USB Device > Autoconnect USB Devices at Startup.
    2. Plug in the USB device and restart Horizon Client.
    USB devices that are connected to the local system when you start Horizon Client are redirected to the remote desktop.

The USB device appears in the desktop. A USB device might take up to 20 seconds to appear in the desktop. The first time you connect the device to the desktop you might be prompted to install drivers.

If the USB device does not appear in the desktop after several minutes, disconnect and reconnect the device to the client computer.

Here, I-2016.1 multi diag access J2534 Pass-Thru OBD2 Device download:

Software: no encryption, directly log in the multi diag access server to use the latest software.

Advantages / Features:

Software is upgraded

Chip program is upgraded

Newest upgrade I-2016.1 multi diag access for sale: $259 (www.uobdii.com)

How to install I-2016.1 multi diag access:

Important Notes:

  • No need activation (the former version needs)
  • Connect to the internet is not allowed during operation.
  • When use I-2016.1 multi diag access to diagnose vehicle, please ensure the “USB PassThru Driver (Multi-instance)” is read out (see following pic)

Installation Youtube video:

Following parts are I-2016.1 033918 multi diag access details:

  1. How to update: Multi-Diag® offers 3 updates per DVD-rom each year to integrate the new vehicles, new functions and the latest innovations ACTIA®.
  2. Connected: Multi-Diag online services are available at any time to fully exploit your tool. Take advantage of the latest innovations thanks to Internet updates, more and more efficient support, a tailor-made service package, personalized follow-up …
  3. Features:

1) Optional interactive links to a wide choice of technical documentation software (Autodata, Vivid, etc …).

2) Exclusivities signed by ACTIA®: The “right-of-way” access to all diagnostic functions according to workshop logic with the Multi-Diag® business mode (+ an expert mode for advanced computer diagnostics, physical measurements and configuration operations is also available).

3) Automatic identification of the vehicle as soon as the tool is connected to the diagnostic socket.

4) The Express Diag function to obtain the complete electronic vehicle balance with diagnostic report with a single click.

5) The annual “updates and services” subscription

  1. I-2016.1 033918 multi diag access Vehicle coverage:

Usb Passthru Driver ( Multi-instance ) Driver Download

Alfa-Romeo, Audi, Autobianchi, BMW, Cadillac, Chevrolet, Chrysler, Citroën, Dacia, Daewoo, Daihatsu, Fiat, Ford, Honda, Hyundai, Jaguar, Kia, Lada, Lancia, Land Rover, Lexus, Maybach, Mazda, Mercedes, MG, Mini, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Proton, Renault, Rover, Saab, Seat, Skoda, Smart, SSangyong, Subaru, Suzuki-Santana, Toyota, Volkswagen, Volvo, Zastava…

  1. J2534 V2016.1Multi-language available
  1. Function

Usb Passthru Driver ( Multi-instance ) Drivers

All maintenance and repair operations

– Reset maintenance indicators

– Read/Erase fault codes

– Read parameters (graphical representation)

– Test actuators

– Configure the calculator,

– Coding (Injectors, electronic tire valves…)

– Calibration and self-learning… Etc.

Testable ECU systems:

injection, ABS, ESP, Airbag, automatic transmission, air conditioning, central computer, dashboard, comfort systems, tire valves, immobilizer, direction, steering, etc…

Connected Services:

Connector “Actiaconnect.com” to receive personalized information and access the many online services:

Usb Passthru Driver ( Multi-instance ) Driver Windows 10

– Latest Updates Vehicles and Systems

– Online Help Topics

– Support requests directly by e-mail

– Remote control of your tool

– Accessories available to complete your Multi-Diag equipment

– Track your online subscription

– Technical and commercial information to fully exploit your diagnostic station

Done.

Related posts: